API 16D Koomey Surface BOP Remote Control Unit Accumulator Unit

Description of BOP Control Unit:

The control system for surface mounted BOP (blowout preventer) stacks is special equipment, which is used to control BOP, hydraulic chock, kill system and diverter equipment, and indispensable equipment for blowout preventer during drilling or workover in petroleum and natural gas industry.

The function of the control system for surface mounted BOP stacks is preparing and prestoring-enough hydraulic oil and controlling its flow direction, in order to open or close BOP quickly. As the hydraulic oil used, the pressure drops down, when the pressure lowers to a certain value, the control system will renew the hydraulic oil automatically, to keep the pressure in a certain high value.

Main parameters as follows

1.Environmental temperature:-13~40°C

2, Power: 380v, 50Hz

3, Nominal pressure: 21MPa(3000Psi)

4.Max.working pressure:34.5MPa(5000Psi)

4, Pressure range: 0~14MPa(0~2000Psi)

5, Nitrogen charging pressure of accumulators: 7±0.7MPa(1000±100Psi)

6, Air supply pressure: 0.65~0.8MPa(93~115Psi)

7, Pressure range of pressure valve: 17.5~21MPa(2500~3000Psi)

8, Hydro-pneumatic pressure switch: 19~21MPa(2700~3000Psi)

Control system has the following characteristic:.

Detailed Images:

Related Products:

Our drilling BOP includes an annular BOP and a ram BOP. The annular BOP, consisting primarily of a shell, a header, a rubber core and a piston, and which by design is equipped with a hydraulic control system, can be used independently but usually operates in tandem with a ram BOP.
In accordance with API 16A requirements, the connections at the top and bottom of the rig are either flange or studded flange and can be conveniently connected to a drilling spool or ram BOP.
Our ram BOP features an advanced design that is nonetheless easy to operate.
The ram BOP is reliable, and spare parts can be easily replaced. As with the annular BOP, it can be used independently or coupled to other BOP combinations.
A hydraulic system can be used to open and close the ram, but should there be no power or air on site to run this system, the rams can be opened or closed manually.

Company Information: